This might happen due to heavy furniture leaving dents or high traffic areas.. An easy way to fluff up these sections is with a hair dryer.

Once the dust bin has been cleaned,.it’s very important to allow time for it to completely dry.

There are several reasons for this:.Moisture in the bin will attract dirt, dust, and other debris when you use the vacuum.This will undo all your hard work cleaning the bin.. Any moisture that’s inside the bin could be sucked into the motor, which is dangerous for both you and the vacuum.. A damp bin is a perfect place for mould to grow..

The seals are often the slowest part of the bin to dry, so check these areas to make sure there’s no moisture remaining.. 5.When you’re satisfied that the bin is dry, you can refit it onto the main vacuum body.. To do this, line up the spine onto the runner, then gently push the bin upwards until it clicks into place.

You’ll also need to close the bin lid.. And you’re finished!

The Dyson V10’s bin should now look much cleaner.. Related Article:.If you’ve been able to remove the brush, give it a gentle clean with water..

Allow the brush to dry for at least 24 hours..Is your home covered in pet hair?

Check out our guide to.removing pet hair using simple techniques.